Sharp MD-SR60E - Manual (Page 9)

9 8
Preparation
Inserting a MiniDisc
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up the compartment.
3
Insert a MiniDisc by pressing the middle
of the edge of the disc.
4
Close the compartment door.
2
1
3
4
Notes:
● Do not place the MiniDisc under the holder.
● If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
● To prevent recordings being lost the MiniDisc can not be
removed until the TOC has been written (“TOC” or “TOC
EDIT ! ” is displayed ). Press the •
■ /:OFF button to update
the TOC and power off, the MiniDisc can now be removed.
Refer to the instructions on page 12.
Check that the erase-protection
tab is in the recordable position.
**02-PREPARATION 02.07.2000, 10:05 AM 9