Using the transmitter, Switching the transmitter on/off – Sennheiser evolution wireless SR 300 IEM User Manual

Page 15

Advertising
background image

Using the transmitter

13

Using the transmitter

To establish a transmission link, proceed as follows:

1.

Switch the transmitter on (see below).

2.

Switch the receiver on (see the instruction manual of the receiver).
The transmission link is established.

If you cannot establish a transmission link between transmitter and receiver:

̈

Make sure that transmitter and receiver are set to the same frequency bank and to the
same channel.

̈

If necessary, read the chapter “If a problem occurs ...” on page 23.

Switching the transmitter on/off

To switch the transmitter

on

(online operation):

To switch the transmitter to

standby mode

:

̈

If necessary, deactivate the lock mode (see page 18).

To completely switch the transmitter

off

:

̈

Disconnect the transmitter from the mains by unplugging the mains unit from the wall
socket.
The backlighting of the

STANDBY

button

goes off.

To switch the transmitter

on

and to

deactivate the RF signal on switch-on

(offline operation):

It is vital to observe the notes on frequency selection on page 21.

̈

Press the

STANDBY

button

.

The transmitter switches on and the standard display appears.
The transmitter transmits an RF signal and the transmission icon

is displayed

You can switch the transmitter on and deactivate the RF signal on switch-on.
For more information, see below.

̈

Keep the

STANDBY

button

pressed until “

OFF

” appears on the display panel.

The display panel switches off.

When in the operating menu, pressing the

STANDBY

button

will cancel your entry

(ESC function) and return you to the standard display.

The

STANDBY

button

is backlit in red both during operation and in standby mode.

̈

Press the

STANDBY

button

until “

RF Mute On?

” appears on the display panel.

̈

Press the jog dial.
The transmission frequency is displayed but the transmitter does not transmit
an RF signal. The transmission icon

is not displayed.

Advertising