Sennheiser evolution wireless SR 300 IEM - Manual (Page 12)

Putting the transmitter into operation
10
̈
Connect the antenna. You have the following options:
– You can connect the supplied rod antenna
ƽ
to the rear of the transmitter (see
page 9). In this case, insert the two blanking plugs into the holes of the blanking
plate (see diagram on page 9).
– You can use the AM 2 antenna front mount kit (optional accessory) and mount the rod
antenna to the blanking plate .
– You can use a remote antenna, if necessary in conjunction with the AC 3 antenna
combiner.
̈
Slide the transmitter with the mounted blanking plate into the 19” rack.
̈
Secure the rack mount “ear” and the blanking plate to the 19” rack.
Rack mounting two
transmitters
To mount two transmitters into a rack using the GA 3 rack adapter:
̈
Place the two transmitters side by side upside-down onto a flat surface.
̈
Secure the jointing plate to the transmitters using six recessed head screws (M 3x6).
̈
Secure the rack mount “ears” to the transmitters as described on page 8.
To mount the antennas:
̈
Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner.
For more information, visit the ew G3 product pages at www.sennheiser.com.
To mount the transmitters into the rack:
̈
Slide the transmitters into the 19” rack.
̈
Secure the rack mount “ears” to the 19” rack.