Sennheiser evolution wireless SR 300 IEM - Manual (Page 17)

Using the transmitter
15
Carrying out an Easy Setup Sync or a Sync function
The following assumes that you are using the Easy Setup Sync function for setting up a multi-
channel system. You can also you the Easy Setup Sync function for establishing a transmis-
sion link between one transmitter and one receiver.
Setting Transferred parameters
“ Balance ” Current balance setting
(“
−15
”/“ +15 ”)
“ Squelch ” Current squelch setting
(“ Off ”, “ 5
dB
” ... “ 25 dB ”)
“ Mode ” Current audio mode setting
(“
Stereo ”/“ Focus ”)
“ High boost ” Current treble boost setting
(“
flat ”/“ High boost ”)
“ Auto Lock ” Current lock mode setting
(“
active ”/“ inactive ”)
“ Limiter ” Current limiter setting
(“
−18 dB
”, “
−12 dB
”, “
−6 dB
”, “ Off ”)
When carrying out the Sync function, the transmitter’s current frequency bank
and channel setting is automatically transferred to the receiver via the infra-red
interface.
Easy Setup Sync Sync
̈
Switch your rack-mount transmitters
and your diversity receiver on.
̈
Switch your rack-mount transmitter
and your diversity receiver on.
̈
On all transmitters, call up the “ Easy
Setup ” menu item.
The text “ Easy Setup Sync ” and the
icon appear on the display panels of the
transmitters.
The RF signal of the transmitters is auto-
matically deactivated.
̈
Press the button
»
on the trans-
mitter.
The
icon appears on the display
panels of the transmitter.
̈
Use your EK 300 IEM G3 diversity receiver
to perform a frequency preset scan and
select a frequency bank with a sufficient
number of unused channels (see the
instruction manual of the receiver). –