Additional i nf or ma tion, Tuner, Optional components – Sony CMT-DH7BT User Manual

Page 71

Advertising
background image

CMT-DH7BT.GB.3-097-195-11(2)

1

GB

Additional I

nf

or

ma
tion

Continued

The subtitles language cannot be

changed.
 Multilingual subtitles are not recorded

on the DVD VIDEO being played

back.

 The DVD VIDEO prohibits changing

the subtitles.

The subtitles cannot be turned off.
 The DVD VIDEO prohibits turning off

subtitles.

The angles cannot be changed.
 Multi-angles are not recorded on the

DVD VIDEO being played back.

 The DVD VIDEO prohibits changing

the angles.

Tuner

The radio presetting is canceled.
 The power cord is disconnected or a

power failure occurred for longer than

half a day. Redo “Listening to preset

radio station” (page 49).

There is severe hum or noise.

(“TUNED” or “ST” flashes in the

display)
 Set the proper band and frequency

(page 48).

 Connect the antenna properly

(page 14).

 Find a place and an orientation that

provide good reception, then set up

the antenna again. If you cannot obtain

good reception, we recommend that

you connect a commercially available

external antenna.

 Keep the antennas, SiriusConnect

Home tuner, and AC adaptor away

from the speaker cords and the power

cord to avoid picking up noise.

 The supplied FM lead antenna receives

signals along its entire length, so make

sure you extend it fully.

 Locate the antennas as far away from

the speaker cords as possible.

 Try turning off the surrounding

electrical equipment.

A stereo FM program cannot be

received in stereo.
 Press FM MODE

repeatedly until

“MONO” disappears from the display.

The system cannot receive satellite

channels at all.
 Check that the XM Mini-Tuner and

Home Dock or the SiriusConnect

Home tuner are connected properly.

 The receiving condition is not good.

Move to the place where the condition

is good.

 Check that you subscribed to the

desired satellite radio service (pages 16

and 17).

Optional components

There is no sound.
 Refer to General item “There is no

sound.” (page 66) and check the

condition of the system.

 Connect the component properly

(page 64) while checking:

if the cords are connected properly.

if the cord plugs are firmly inserted

all the way.

 Turn on the connected component.

 Refer to the operating instructions

supplied with the connected

component and start playing.

Advertising