Sony IPELA SNC-RH124 - Manual (Page 23)

O
per
at
ing
t
he
Came
ra
Controlling the Camera on a Panorama Image
23
Controlling the Camera
on a Panorama Image
In the panorama window, a 360° view around the camera
is displayed as a panorama image. When you click on
the displayed panorama image, the camera faces the
clicked area.
To create a panorama image
Create the panorama image with the supplied SNC
toolbox. See page 99 for details.
Tip
The panorama image is a still picture converted from the
image taken when you were going to create it with SNC
toolbox. When the camera is moved or when the layout
around the camera is changed, you should create the
panorama image again.
Facing the camera toward a
specified point
1
Create a panorama image with SNC toolbox and
display it.
Two “Panorama Image” display formats are
available: round image and round panorama image.
You can select the desired display format by
clicking
to the upper right.
2
Click the point you want to watch in the panorama
window.
The camera is moved to face toward the clicked
point, and the present image at the point is
displayed in the monitor window.
To rotate the panorama image
To rotate the panorama image in accordance with the
camera's panning direction, set Panorama mode to
Rotate in the System menu of the Administrator menu
(page 32). (The
mark on the panorama image
indicates the panning home position.)
Note
The panorama image can be rotated only when a 360-
degree panorama image has been created using SNC
toolbox.
SNC-RH124/RH164
Panorama window