Sony IPELA SNC-RH124 - Manual (Page 49)

A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Network — Network Menu
49
Set
Used when registering on the QoS table.
QoS is set according to the following procedure:
1
Select No. from NO. and enter the necessary
conditions for Network address, Subnet, Protocol
and/or Port No..
2
Enter values in the Protocol and DSCP fields.
3
Click Set and configure the QoS.
Delete
select No. to delete the setting and click Delete.
QoS table
Displays the list of registered QoS information.
IPv6 QoS setting
Select On to configure the QoS setting for IPv6.
Rule
Used to register, edit and delete QoS.
No.
Select the number to use when registering on the QoS
table.
When you select a registered number, the registered QoS
information is displayed.
Network address
Enter the address to perform QoS.
Prefix
Enter the prefix.
Port
Enter the port number.
Protocol
Select the protocol.
DSCP
Enter the DSCP value.
Set
Used when registering on the QoS table.
QoS is set according to the following procedure:
1
Select the number you want to register from No.
and enter the necessary conditions for Network
address, Prefix and Port.
2
Select Protocol and enter values in DSCP.
3
Click Set and configure the QoS.
Delete
select No. to delete the setting and click Delete.
QoS table
Displays the list of registered QoS information.
Dynamic IP address notification
Tab — Notifying the IP Address
When Obtain an IP address automatically (DHCP) is
selected in the Network tab or Wireless tab, you can
send notification of completion of the network settings
using the SMTP or HTTP protocol.
e-Mail (SMTP) notification
Select On to send an e-mail when the DHCP setting is
completed.
SMTP server name
Type the name or IP address of the SMTP server for
sending an e-mail, using up to 64 characters.
SMTP port number
Select the textbox and enter a port number from 25 to
65535.
Use TLS
To use the encryption function by TLS, set to On.
STARTTLS
To use the encryption function by STARTTLS, set to
On.