Samsung DVD-L70A - Manual (Page 98)

30
ENGLISH
Troubleshooting
• Check that the LCD display is turned on.
• Check the volume setting. If set to zero, turn up volume level.
• Check that the headphones are plugged into the ”B” jack.
Speakers cannot be used if headphones are plugged into "B".
• Use a disc without scratches or dents.
• Check that the video or audio cable is securely connected.
No picture
No sound
Distorted video or sound
While zin the input mode, no
picture is output from the external
component to the DVD player
Video does not appear with
a external component
connected to the DVD
player
Battery pack won’t charge
Power does not turn on
Power charge lamp does
not light (Battery pack
won’t charge)
Power charge lamp
quickly
• Check the TV's input setting.
• Check that the video or audio cable is securely connected.
• Check that the DVD player is turned off. You cannot charge the battery pack with the
player turned on.
• A hot battery pack may take longer to charge. Wait until the battery pack is
sufficiently cooled down.
• Replace with a fully charged battery pack or use the AC adapter.
• Replace with a fully charged battery pack or use the AC adapter.
• If the DVD player is overheated and the battery pack’s internal temperature goes up
to a certain level, you will not be able to charge the battery pack.
If this occurs, remove the battery pack. After the battery pack has sufficiently cooled
down, charging will begin automatically.
• Check that the temperature is within the range of 10°C~30°C.
• Check that the DC cord of the AC adapter is plugged in correctly.
• Remove the DC cord from the battery pack and then re-plug.
If the battery pack is installed, remove the DC cord from the battery pack before
performing above procedure.
Symptom Check
DVD
Battery
Pack
operation
L70A/75A-Eng-XEF 7/26/05 8:48 PM Page 30