Sony RM-U401 - Manual (Page 7)

7
Location of Parts and Basic Remote Operations
!¢ ENTER D.TUNING button
If you have selected tuner:
Press to enter direct tuning mode.
If you have selected VCR, DVD player, LD player,
TV, DBS tuner, tape deck, MD deck, or CD player:
After selecting a channel, disc, or track using the
numeric buttons, press to enter the value.
!∞ SHIFT >10 -/-- button
If you have selected tuner:
Press repeatedly to select a memory page for
presetting radio stations or tuning to preset stations.
If you selected VCR, TV, LD player, tape deck, MD
deck, or CD player:
Press before inputting a channel or track number of
eleven or higher.
!§ Numeric buttons (1 to 0)
Inputs the correponding numeric value. When
inputting a channel, disc, or track number, 0 selects 10.
!¶ CH/PRESET +/– buttons
Press repeatedly to select a preset station or channel.
!• CURSOR MODE button
Press this button repeatedly to select any of the
following three cursor modes. The indicator for the
selected cursor mode lights up to the left of the display
window on the receiver. The indicator turns off when
you press the SET UP button on the receiver.
When the cursor mode is You can
SURROUND Change the delay time and the
effect level
BASS/TREBLE or EQ Adjust the tone (bass/treble) of
the front speakers. Press the EQ/
TONE ON/OFF button to
activate the tone effect.
INDEX Enter an index name for a preset
station or program source
Note
The CURSOR MODE button does not operate on receivers
that have no cursor buttons.
!ª Tape/disc operation buttons
The following table describes the component operated
by each button and the function of the buttons.
Button(s) Component(s) Function
9 Tape deck Starts play on the reverse
side of the cassette
( VCR, DVD player,
LD player, tape deck,
MD deck, CD player,
DAT deck Starts play on the front
side of the cassette
P VCR, DVD player,
LD player, tape deck,
MD deck, CD player,
DAT deck Pauses play or recording
or starts recording when
the component is in
recording standby
p VCR, DVD player,
LD player, tape deck,
MD deck, CD player,
DAT deck Stops play
=/+ VCR, DVD player,
LD player, tape deck,
MD deck, CD player,
DAT deck Skips tracks
DISC
0/) VCR, LD player, tape
deck, MD deck, DAT
deck Fastwinds or rewinds
DVD player, CD
player Searches tracks in the
forward or backward
direction
r VCR, tape deck, MD
deck, DAT deck Sets the tape deck in
recording standby
r + ( (if
pressed
together) VCR, Tape deck,
DAT deck Starts recording. You can
press 9 for the tape
deck or DAT deck
instead of (.
CD player Selects a disc (CD player
with a multi-disc changer
only)
D.SKIP CD player Skips a disc (CD player
with a multi-disc changer
only)
See the table on page 10 for information on the buttons
that you can use to control each component.