Sharp PG-A20X - Manual (Page 43)

Basic Operation
-39
Signal Info
(Checking the
Input Signal)
Select “Signal Info” on the “Fine Sync” menu
to check the current input signal informa-
tion.
Note
• The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digital
Video.
Auto Sync
(Auto Sync Adjust-
ment)
Used to automatically adjust a computer image.
Select “Auto Sync” on the “Fine Sync” menu
and set it to “
”(ON) or “ ”(OFF).
Description of Auto Sync Adjustment
Selectable Settings Description
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
cally perfomed.
Note
• Auto Sync adjustment is also performed by
pressing on the projector or on
the remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page
38 .)
ON
OFF
AUTO SYNC
button
AUTO SYNC
button
PG-A20X_E_PDF_P32_39.p65 03.4.23, 11:57 AM 39