Sharp PG-A20X - Manual (Page 50)

-46
Auto Power Off
(Auto
Power Off Function)
When no input signal is detected for more than 15
minutes, the projector will automatically enter the
standby mode if set to “ON”.
The Auto Power Off function will be disabled if it
has been set to “OFF”.
Select “ ” (ON) or “ ” (OFF) in “Auto
Power Off” on the “Options” menu.
Note
• When the Auto Power Off function is set to “ON”,
5 minutes before the projector enters the
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes before power off.
Menu Position
(Selecting
the Menu Screen Position)
Select “Menu Position” on the “Options”
menu and the desired position for the menu
screen.
Description of Menu Positions
Menu Color
(Selecting the
Menu Color)
Select “ ” (Opaque) or “ ” (Translucent)
in “Menu Color” on the “Options” menu.
Description of Menu Colors
Using the “Options” Menu
Selectable settings
Center
Upper Right
Lower Right
Upper Left
Lower Left
Description
Displayed on the center of the image.
Displayed on the upper right of the image.
Displayed on the lower right of the image.
Displayed on the upper left of the image.
Displayed on the lower left of the image.
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Selectable settings
Opaque
Translucent
Description
The menu is displayed opaquely.
The menu is displayed translucently.
The part of the menu on the image
becomes transparent.
PG-A20X_E_PDF_P40_50.p65 03.4.23, 9:58 AM 46