Sony 76c - Manual (Page 37)

Projecting 37
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■ To focus or zoom your image, below.
■ If the image is too high or too low, you can reposition it.
See page 38.
■ If the image isn’t square, see page 39.
■ To adjust image brightness, see page 39.
■ If a computer image displays incorrectly, see page 40.
■ To change the color mode for your image and surroundings, see
page 40.
You can make many other adjustments to the image—such as
changing the brightness, contrast, and aspect ratio—using the
projector’s menu system. See Chapter 4 for more information.
Focusing and Zooming Your Image
Rotate the focus ring to sharpen the image.
Rotate the zoom ring to reduce or enlarge the image.
You can also change the image size by moving the projector closer to
or farther away from the screen. You can use the
E-Zoom buttons on
the remote control to zoom in on a portion of the image. See page 45
for instructions.
Focus ring
Zoom ring