Sanyo SCP-7400 - Manual (Page 161)

Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Ready Link contact:
1. Press R-Link (left softkey) or press .
2. Select <Add Contact> and press .
– or –
Select a contact and press Options (right softkey). Then
highlight Add Contact and press
.
3. Enter a name for the new contact and press . (This is the
name you will see when calling or receiving a call from the
contact.)
4. Select R-Link Number, enter the contact’s 10-digit Ready Link
number (their wireless phone number) and press
.
5. Press Save (left softkey) to save the new contact to your
Personal List.
Tip: You are not allowed to use the following symbols during step 4: “:”, “@”, “;”,
“/”, “
*
”, “(”, and “)”.
Section 2J: Using Ready Link 148