Sony RM-LJ312 - Manual (Page 19)

U
s
ing th
e li
sts
19 GB
To cancel programming
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
Tips
• In step 7, when no indication appears in front of the
function name, no IR code is programmed. You
cannot use the function for the macro play.
• In step 4 and 7, when “NO SET” is displayed after
the program number, the codes have not been
programmed for the macro play.
• In step 5, when you select “Button”,
– If “x” appears in the list in step 7, the button is
already learned.
– If you press < or > after you select the program
step in step 7, the programmed IR code is emitted
and you can check the operation.
Note
If you select “IR SET” for a component that already
has a learned button setting, the learned codes for that
component are cleared. Furthermore, if the cleared
learned button is used in a Macro play setting, the
setting for that button will be changes to “NO SET”.
Starting macro play
1
Press INPUT SELECTOR.
The input list appears.
2
Move the easy scroll key to select
“MACRO1” or “MACRO2”, then press
the key to enter the selection.
The IR codes appear in the display window
as they are performed.
Notes
• Pressing any of the following buttons during a macro
play operation will cancel the macro play sequence
before it is complete.
– AV ?/1
– ?/1
– SYSTEM STANDBY
– SOUND FIELD
– INPUT SELECTOR
– RM SET UP
• When the Macro Play function does not work
properly, set “WAIT TIME” between each
operation.
USER1
USER2
cMACRO1
MACRO2