Mesures de précaution – Shark CV242 User Manual

Page 10

Advertising
background image

MESURES DE PRÉCAUTION

ORDERING REPLACEMENT FILTERS

TO ORDER REPLACEMENT HEPA DUST BAGS

FOR MODEL CV242

HEPA Dust Bag SKU #XSH242

Important :

Si la trappe de succion, le boyau ou la rallonge de chrome sont

OBSTRUÉS, éteignez l’aspirateur et retirez l’obstruction avant de le redémarrer.

1.

N’approchez pas l’aspirateur
trop près des éléments
chauffants ou des radiateurs.

4.

Lorsque vous retirez le cordon
d’alimentation de la prise
murale, tirez sur la fiche et non
pas sur le cordon.

Call:

1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

or

visit our website: www.sharkvac.com

FOR TECHNICAL SUPPORT

for Models CV242

Call:

1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

5.

Ne ramassez aucun objet fumant
ou brûlant tels que les cigarettes,
allumettes ou cendres chaudes.

2.

Avant d’insérer la fiche d’alimentation
dans la prise murale, assurez-vous
que vos mains sont sèches.

Please Note:

The Pre-Motor and Post Motor Filter may be washed. We recommend that this be

done once a month or when suction appears reduced .

To wash your Pre-Motor and Post Motor Filter, hold filter and rinse under water. When

finished, shake off excess water. Do NOT wash in dishwasher.

It is important that when you wash any filter, you allow it to air dry COMPLETELY

before using again. We recommend 24 hours to air dry. DO NOT DRY IN DRYER.

IMPORTANT: Both the Pre-Motor and the Post Motor filters should be replaced every

three (3) to six (6) months depending on usage.
All filters and HEPA dust bag should be checked regularly for signs of damage,

preferable after each cleaning task. The HEPA dust bag or filters must be replaced

immediately if they become damaged.

Always disconnect the vacuum from the electrical outlet when checking the filters.
NEVER re-use the HEPA dust bags. Always replace the dust bags with new ones

when changing them.

6.

N’utilisez pas l’aspirateur sans sa
coupelle HEPA ou tous ses filtres.

Remarque:

Cet aspirateur est doté

d’un cordon d’alimentation auto

rétractable. Si la fiche ou le cordon sont

endommagés, le cordon doit être

remplacé par un technicien qualifié.

3.

Avant de commencer à nettoyer,
assurez-vous de retirer tout gros
objet ou tout objet coupant
pouvant endommager le sac à
poussière HEPA.

Avertissement:

Tenez toujours la fiche

lorsque vous rembobinez le cordon

d’alimentation. Ne laissez pas fouetter le

cordon lorsque vous rembobinez.

9

22

Advertising