Sony PCWA-C300S - Manual (Page 44)

44
8
Click “OK” to close the “Sony 802.11g Wireless LAN Adapter
Properties” dialog box.
The “System Properties” dialog box appears.
9
Click “OK” to close the “System Properties” dialog box.
Control Panel appears.
10
Click to close Control Panel.
If the computer you are using incorporates another Ethernet interface
besides the Wireless LAN PC Card, disable the other interface as follows.
1
Click “Start”, point to “Settings”, and click “Control Panel”.
Control Panel appears.
2
Double-click the “System” icon.
z
Hint
If the “System” icon is not shown, select “View all Control Panel options”.
3
Click the “Device Manager” tab and double-click “Network
adapters”.
4
Double-click the network adapter to disable.
5
Click the “General” tab, then select the “Disable in this
hardware profile” check box.
6
Click “OK” to close the Properties dialog box for the network
adapter to disable.
The “System Properties” dialog box appears.
7
Click “OK” to close the “System Properties” dialog box.
Control Panel appears.
8
Click to close Control Panel.