Using the radio data system (rds) – Sony HT-SL40 User Manual

Page 28

Advertising
background image

28

GB

HT-SL55 4-247-583-12(1) GB

5

Press MEMORY again to store the
station.

If “MEMORY” goes out before you can
store the station, start again from step 3.

6

Repeat steps 2 to 5 to preset another
station.

To change a preset number to

another station

Do steps 1 to 5 to preset a new station to the
number.

Tuning to preset stations

You can tune the preset stations by either of the
following two ways.

Scanning the preset stations

1

Press TUNER.

The last received station is tuned in.

2

Press PRESET + or PRESET –
repeatedly to select the preset station
you want.

Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order and direction as
follows:

Using the preset codes

1

Press TUNER.

The last received station is tuned in.

2

Press SHIFT to select a memory page
(A, B, or C), then press the preset
number of the station you want using
the numeric buttons.

Tip

You can also use PRESET TUNING +/– on the
receiver to tune to preset stations.

nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N

nC0˜...C2˜C1N

Using the Radio Data
System (RDS)

(Models of area code CEL, CEK only)

This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal.

Note that RDS is operable only for FM
stations.*

* Not all FM stations provide RDS service, nor do

they provide the same types of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.

Receiving RDS broadcasts

Simply select a station on the FM band
using direct tuning (page 26), automatic
tuning (page 27), or preset tuning
(page 27).

When you tune in a station that provides RDS
services, the RDS indicator lights up and the
program station name normally appears in the
display.

Note

RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if the
signal strength is weak.

Preset tuning (continued)

GB07TUN_HT-SL55.p65

28/4/2003, 11:58 AM

28

Advertising
This manual is related to the following products: