Samsung CHT-420 - Manual (Page 25)

45 44
How to Set a Timer Recording
Insert a blank tape with a Record Safety Tab into the VCR deck.
The Timer Recording Feature allows you to program up to 8 events
at a time to record up to a month in advance.
Set the TV to channel 3 or 4.
Before You Begin...
• Power on the DVD-VCR
• Power on the TV
1 Open “MENU”
With the DVD in stop mode, press the MENU button or with the
VCR press the TIMER button.
2 Select “Program”
Using the up/down and left/right buttons, move the selection cursor
to “Set Timer Recording,” then press ENTER to select.
3 Select Channel Number
Press right and up/down buttons to set the channel. Press the right
button to move to the next setting.
4 Set “Time/Date/Speed”
Repeat step 3 to set start time, end time, date and record speed.
Date can be set for one time, daily or weekly recording. See below.
5 Save “Timer Recording”
Press the RETURN button to complete programming of the timer
recording. Stop the VCR or turn the power off. The timer indicator
comes on the VCR. The VCR will automatically turn on and begin
recording at the time you set. To stop a timer recording, press the
POWER button or STOP button on the VCR.
6 Auto Speed Select
If you are not sure the tape is long enough for timer program
recording in the SP tape speed, set the recording tape speed to
“AUTO”. Recording starts in the SP tape speed. If the tape length is
not long enough, the tape speed automatically changes from SP to
SLP.
7 Daily/Weekly Date Programming
Weekly [SUN’S~SAT’S]: You can record TV programs on the same
channel at the same time every week.
Daily [MO
❿ FR] : You can record TV programs on the same
channel at the same time every day Monday through Friday.
MAIN MENU
Set Timer Recording
RETURN ❷ ➛ ❿ ENTER
Program Clock Install Exit
DVD VCR Options Language
Program
CH START END DATE SPD
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
RETURN ❷ ➛ ❿
Record Speed
You can slow down the recording speed from SP to SLP in order to
fit six hours of programming on a T-120 tape.
1 Start Recording
Follow the Basic Recording instructions on page 42.
2 Set Record Speed
Press the SPEED button on the remote control to set the Record
Speed to one of the following options:
• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times
SP).
NOTE: The selected Record Speed will appear on-screen display.
Maximum Recording Time - SP vs. SLP
Tape Length SP (Standard Play) SLP (Super Long Play)
T-120 2 hrs 6 hrs
T-160 2hrs 40 mins 8 hrs
T-180 3 hrs 9 hrs
2
One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 4 hours at the touch of a button.
1 Start Recording
Follow the instructions on page 42 to begin recording.
2 Activate OTR
While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen Display and the
DVD-VCR will record for exactly 30 minutes.
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute
increments up to 4 hours.
• The DVD-VCR stops recording automatically when the time has
elapsed.
One-Touch Recording (OTR)
RECORD
SP
Record length 0:30 07 0:30
1:00
1:30
2:00
3:00
4:00