Sony Cyber-shot DSC-HX1 - Manual (Page 38)

38 GB
Shooting panoramic images
Shoots multiple images and allows you to create a panoramic image from composed
images while you pan the camera. You can create both up and down, and right and left
panoramic images.
• If you cannot pan the camera across the entire subject within the given time, a gray area occurs in
the composed image. If this happens, move the camera fast to record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• You cannot create panoramic images in the following situations:
– You pan the camera too fast or too slow
– There is too much camera shake
– You pan the camera in a different direction from the setting
• Under low light conditions, panoramic images may be blurred.
1 Set the mode dial to (Sweep
Panorama).
2 Hold the camera at the position
where you can see the LCD screen
clearly.
Press the MENU button for changing [Shooting
Direction] or [Image Size] (page 58).
3 Fully press the shutter button.
4 Pan the camera following the
indication on the screen.
When a guidance bar reaches to the end, the
shooting stops and panoramic images are
recorded.
Notes
This part will not be taken.
Guidance bar