Silvercrest KH2376 - Manual (Page 17)

19
Initial operation
Bluetooth Car Radio KH 2376
GB
Initial operation
Face plate
To protect against theft you can remove the face plate from your device. Do not
store the removed face plate in your vehicle.
NOTICE
When the face plate is not inserted into the frame the theft protection ►
LED 30 on the device blinks.
To safeguard the face plate always keep it stored in its case. ►
Installing the face plate
Place the face plate with the left side in the ‹
frame fi rst.
Then fi rmly press the right side until it locks into ‹
place.
Check to make sure that the face plate is fi rmly and
correctely installed in the frame. If the face plate is
incorrectly installed it can result in malfunctions when
operating the device.
Removing the face plate
Press the ‹ 10 button to unlock the face plate.
Tilt the face plate completely forward. ‹
Slide the face plate to the left and then pull fi rst ‹
the right and then the left side away.