Handling and operation – Silvercrest KH2376 User Manual
Page 31
33
Handling and operation
Bluetooth Car Radio KH 2376
GB
Call accept/end
With an incoming call you hear the call signal via your mobile telephone, whilst in
the device's display is shown the call number.
You accept an incoming call by pressing the
TALK button on the microphone
unit or the
button on the device and/or on the remote control.
You end the call by pressing the
TALK button again on the microphone unit
or the
button on the device and/or on the remote control.
Rejecting a call
With an incoming call press, for longer than 2 seconds, the
TALK button on
the microphone unit or press the
button on the device and/or on the
remote control to reject the call.
To call
Press the
button on the remote control. A blinking cursor appears in the
display.
With the number buttons enter the telephone number that you want to call.
Press the
button again. The number will be dialed.
Redial
Hold down the
TALK button on the microphone unit or the
button on the
device and/or on the remote control for approx. 2 seconds.
- If no call number was previously selected via the remote control's
–
number buttons REDIAL appears briefl y in the display and then the last
number dialed from the mobile telephone will be dialed.
If one or more call numbers were already dialed via the remote control's
–
number buttons REDIAL appears in the display.
Turn the multi controller or press the
VOL- and/or VOL+ buttons on the
remote control to show the last 10 dialed numbers one after the other.
Press the
button on the remote control to select the chosen call number.
Select the entry
REDIAL and then press the
button on the remote
control to end redial.