Smart Technologies Smart Projector UF75/UF75w - Manual (Page 4)

4 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 OR UF75W
PROJECTOR
TIP
If the cover is difficult to remove, insert a flat screwdriver or small coin into the
slot on the bottom of the lamp cover to gently pry the cover open.
5. Use a Phillips screwdriver to loosen the two captive screws from the bottom of the
lamp module.
NOTE
Loosen the captive screws. Don’t remove them.
6. Use the handle on the bottom of the lamp module to slide out the lamp and
remove it from the projector.
7. Put the old lamp in a secure container, and handle it gently until you recycle it.
8. Use a vacuum with a soft bristle attachment to gently clean the area, being careful
not to touch any optical components.