Sony SLV-E180EG - Manual (Page 9)

Getting Started 8
Step 4
1
Press ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
4
Press RF CHANNEL.
The TV system appears in the display window.
ON/STANDBY
RF CHANNEL
PROGRAM +/–
Tuning your TV to the VCR
If you connect the VCR to your TV using the EURO-AV cable, skip this step.
RF CHANNEL
AUTO SET UP
RF CHANNEL
AUTO SET UP
ON/STANDBY