Viewing pictures from connected equipment – Sony BRAVIA KDL-22EX3xx User Manual

Page 20

Advertising
background image

20

GB

Viewing pictures from

connected equipment

Turn on the connected equipment, then
perform one of the following operation.

For an auto-tuned VCR page 7
In analogue mode, press PROG +/–, or the number
buttons, to select the video channel.

For other connected equipment
Press

to display the connected equipment list.

Press

F

/

f

to select the desired input source, then

press . (The highlighted item is selected if two

seconds pass without any operation after pressing

F

/

f

.)

For a USB device
See page 21.

~

• Be sure to use only an authorised HDMI cable bearing

the HDMI logo. We recommend that you use a Sony
HDMI cable.

• When HDMI control compatible equipment is

connected, communication with the connected
equipment is supported. Refer to page 22 to set up this
communication.

Symbol on the

screen

Description

Component To see the equipment connected to

A

.

HDMI1,
HDMI2,
HDMI3 or
HDMI4

HDMI IN 1, HDMI IN 2, HDMI IN
3 or HDMI IN 4
To see the equipment connected to
B

, C, D or L.

Digital video and audio signals are
input from the connected equipment.
If the equipment has a DVI socket,
connect the DVI socket to the
HDMI IN 1 socket through a DVI-
HDMI adaptor interface (not
supplied), and connect the
equipment’s audio out sockets to the
audio in sockets in the HDMI IN 1
sockets.
Connect to the HDMI IN 2 socket,
to view photographs or screen
images from a PC or digital video
camera.

AV1

To see the equipment connected to
E

.

AV2

To see the equipment connected to
F

.

PC

To see the equipment connected to
H

.

z

• It is recommended to use a PC cable

with ferrites like the “Connector, D-
sub 15” (ref. 1-793-504-11,
available in Sony Service Centre), or
equivalent.

USB

To see the equipment connected to
K

.

You can enjoy photo/music/video
files stored in a Sony digital still
camera or camcorder (

page 21

).

AV3

To see the equipment connected to
M

.

When connecting mono equipment,
connect to the

AV3 L socket.

To connect

Do this

Conditional
Access Module
(CAM) J

To use Pay Per View services.
For details, refer to the instruction
manual supplied with your CAM.
Turn off the TV when inserting or
removing your CAM.
~

• CAM is not supported in some

countries/regions. Check with your
authorised dealer.

Hi-Fi audio
equipment G

Connect to the audio output sockets

to listen to the sound from the

TV on Hi-Fi audio equipment.
Audio level of the external speakers
can be modified by pressing the
volume buttons on the remote control.

DIGITAL
AUDIO OUT
(OPTICAL) I

Use an optical audio cable.

Headphones
N

Connect to the i socket to listen to
sound from the TV on headphones.

Symbol on the

screen

Description

070MEN.fm Page 20 Thursday, December 10, 2009 11:57 AM

Advertising
This manual is related to the following products: