Standard equipment and specifications, A) maximum lift height at pivot pin 112.5, B) maximum height under bucket 106.35 – Servis-Rhino 2409TL User Manual
Page 49: C) clearance with bucket dumped 90.5, D) reach at maximum height 17.8, E) maximum dump angle 47, F) reach with attachment on ground 63.7, G) attachment rollback angle 22.5, H) digging depth 5.5, Standard equipment and specifications -3
OPERATION
2409TL 01/11
Operation Section 4-3
© 2011 Alamo Group Inc.
OPERA
T
ION
1.
Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 72” bucket, external hydraulic system of 12 GPM with engine operating at 2500 RPM and
relief setting of 2650 PSI.
Break-away Capacity
At Bucket Pivot Point
3890 lbs.
500 mm Forward of Bucket Pivot Point
2880 lbs.
Lift Capacity at Full Height
At Bucket Pivot Point
2800 lbs.
500 mm Forward of Bucket Pivot Point
2180 lbs.
Raising Time
4.4 sec
Lowering Time
2.9 sec
Bucket Dumping Time
1.6 sec
Bucket Rollback Time
1.7 sec
Weight w/ 72” HD Material Bucket (w/o Mounting/Valve Kit)
790 lbs.
Lift Cylinder
2.5 in
Stroke
17.69 in
Piston Diameter
2.5 in
Rod Diameter
1.38 in
Bucket Cylinder
2.0 in
Stroke
18.12 in
Piston Diameter
2.0 in
Rod Diameter
1.38 in
(A)
Maximum Lift Height at Pivot Pin
112.5”
(B)
Maximum Height Under Bucket
106.35”
(C)
Clearance with Bucket Dumped
90.5”
(D)
Reach at Maximum Height
17.8”
(E)
Maximum Dump Angle
47°
(F)
Reach with Attachment on Ground
63.7”
(G)
Attachment Rollback Angle
22.5°
(H)
Digging Depth
5.5”
(I)
Overall Height in Carry Position (at Boom Arm Top)
58.8” @ boom arm top
(Manufacturers estimated specifications and design subject to change without notice.)