Sonic Blue Replay TV 5000 - Manual (Page 31)

25
Connections
Getting Sta
rted
Se
tu
p
Basi
c
Ope
rations
Ad
vanc
e
d
Fe
atures
He
lp
System Information
View the system information for your ReplayTV. This screen lists:
•
the version of software your ReplayTV is using
• the Serial Number of your ReplayTV
• the Internet Serial Number of your ReplayTV
• the Inbound Port Number, if set
• the ReplayTV Service Key for Service Activation
:: Remote Control Setup
Follow these steps to program the remote control to operate your television, TV/VCR combo or TV/DVD combo. When pro-
grammed, the ReplayTV remote will control your TV’s power and volume.
1
Press and hold the Mute and TV (Power) buttons until the LED blinks twice.
2 Enter the 4-digit code for your brand of television (see listings on pages 26-28).
• For example, for Sony, press Mute and TV (Power) simultaneously, and then press 0-0-0-0.
• If a valid code has been entered, the LED at the top of the remote will blink twice.
• If an invalid code has been entered, there will be one long blink and the remote will revert to the previously programmed code.
3 To test the code, press the TV (Power) button on the remote control.
• If your TV turns on/off, programming is complete.
• If your TV does not turn on/off, try another code for your brand of television. Not all TVs can be programmed.
• To clear all settings, press Mute + TV(Power), then press 9-8-1.