Sony CDX-4150RDS - Manual (Page 11)

11
EN
Actual total number: Sony CDX-4150RDS ( E ,S,P,Sw) 3-859-317-12(1)
1
Press (PTY) during FM reception until
“PTY” appears.
The current programme type name appears
if the station is transmitting PTY data.
“- - - - -” appears if the received station is
not an RDS station, or if the RDS data has
not been received.
2
Press (PTY) repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select “NONE” (Not specified) for
searching.
3
Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
“NO” and the programme type appear
alternately for five seconds if the unit
cannot find the programme type. It then
returns to the previous station.
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
During FM reception, press (2) while
pressing (SEL).
“CT” is displayed, and the clock is set.
To cancel the CT function
Repeat the above procedure.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by the
CT function and the actual time.
INFO
100
FM1 CT
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance and
fader. Each source can store the bass and treble
level settings independently.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
2
Adjust the selected item by pressing (+)
or (–).
Adjust within three seconds after selecting
the item. (After three seconds, the buttons
work as volume control buttons.)
Muting the sound
Press (MUTE).
“MUTE” flashes.
To restore the previous volume level, press
(MUTE) again.
RDS/Other Functions