Samsung SCC-C6403 - Manual (Page 18)

3-11
E
3-10
For items in the BLC menu, the user can set the size and location of the
BLC area by pressing [ENTER] key after put the cursor on USER… using
the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left,
Right] key to designate the SIZE, and then press the [ENTER] key.
You can set the location for areas using the [Up, Down, Left, Right] key in
the LOCATION.
(ALC)
BLC OFF
LEVEL (0)----
I ----
RET
(VIDEO SET)
IRIS ALC...
SHUTTER AUTO X2...
MOTION NORM
WHITE BAL ATW1
DIS ---
FOCUS MODE ONEAF
SPECIAL ...
EXIT QUIT
BLC (Submenu of the ALC menu)
If you use a general camera to photograph a subject under backlight or
bright illumination, the subject will be shown dark on the monitor due to
the backlight. BLC(Back Light Compensation) is used to prevent such a
backlight problem to secure distinct images under bright illumination.
Using the [Left, Right] keys, you can set up BOTTOM…, TOP…, LEFT…,
RIGHT…, CENTER… 5 preset areas and the USER…function that can
directly set the areas. For example, for the items in the BLC menu, you
can confirm the preset BOTTOM area by pressing [ENTER] key in the
BOTTOM… status.
(ALC)
BLC BOTTOM...
LEVEL (0)----I----
RET
Use [Left, Right] key in the LEVEL menu to control the video output
level(brightness).
(ALC)
BLC USER...
LEVEL (0) ----I----
RET
SIZE
LOCATION
SIZE
LOCATION
SIZE
LOCATION
MANU
When you press [ENTER] key after selecting MANU in the IRIS item, an
additional screen appears in which you can set manually opening or closing
the IRIS.
(VIDEO SET)
IRIS MANU...
SHUTTER OFF
AGC OFF
WHITE BAL ATW1
DIS OFF
FOCUS MODE ONEAF
SPECIAL ...
EXIT QUIT
(MANUAL)
LEVEL (00) ----I----
RET
➜
Press
[Enter]
➜
Press
[Enter]
➜
Press
[Enter]
➜
Press
[Enter]
➜
Press
[Enter]
2. VIDEO SET MENU
IRIS
There is a function to automatically adjust IRIS to the incoming light level.
Owing to this function, you may set up the brightness level yourself.
The ALC(Auto Light Control) menu allows you for video output level setup.
ALC
Choose the ALC of the IRIS item and press [ENTER] and set he submenu
to the Video Output level and BLC will be shown.The Video Output Level
can be set in the level item using the [Left, Right] keys.
EXIT
The EXIT menu is used to quit the CAMERA SET menu of the
SCC-C6403 and return to the MAIN MENU.
- QUIT
: Ignores the changed information and restores the saved
information.
- SAVE : Saves the information of the setting condition of the menu.
- PRESET : Ignores the changed information and restores the initial
factory defaults of the menu.
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 3-10