Sony HT-V600DP - Manual (Page 32)

32
DVD and Video CD Operation (Continued)
General Features (Continued)
Changing Video Mode
With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To change the video mode, press and hold DVD DIS-
PLAY about 3 seconds during disc playback. The new
video mode number selected is displayed on the TV
screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
Video mode sequence:
MODE1 → MODE2 → MODE3 → MODE1
If you turn off the power, the video mode will return to
initial default state (MODE1).
Detailed Description of each Video Mode
M O DE1 : The source material of the DVD video (film materi-
al or video material) is determined from disc information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3 : Suitable for playing video based content with
comparatively little moti on.
Note
The video mode setting only works when the
Progressive Scan mode is set to “On” in the Setup
menu.
Special DVD Features
Checking the contents of DVD Video
discs: Menus
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DVD DIS-
PLAY. Then, press the appropriate number button to
select an option. Or, use B/b/V/v buttons to highlight
your selection, then press ENTER.
Title Menu
1 Press DVD TOP MENU.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press DVD TOP MENU
again.
DVD Menu
1 Press DVD MENU.
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU again.
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon appears on the TV
screen. You can then change the camera angle if you
wish.
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Changing the Audio Language
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (ST, LEFT or RIGHT).
Subtitle
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Note
If
appears, the feature at that moment or with that
specific DVD.
Screen Saver
The screen saver picture appears when you leave the
DVD/VCR Receiver in Stop mode for about 5 minutes.
1 ENG DVD
RIGHT LEFT ST
VCD1.1 VCD2.0
1 ENG
D
5.1 CH
DVD
1 /1 DVD
DVD
DVD
DVD