SMC Networks Barricade SMC7004ABR - Manual (Page 52)

U
SING
S
YSTEM
T
OOLS
4-20
Using System Tools
You can use the “Tools” menu to reboot the Barricade, restore
factory settings, or update firmware.
The “Backup Settings” button allows you to save your Barricade’s
configuration to a file named config.bin on your PC. You can then
click on the “Restore Settings” button to restore the saved backup
configuration file.
Note: If you use the Reset button on the front panel, the Barricade
performs a power reset and restores the factory settings.
Clear Click on this button to delete the access log.
DHCP Client Log Displays information on all DHCP clients on
your network.
Release Click on this button to confirm DHCP settings.
Renew Click on this button to refresh DHCP settings.