Sennheiser EK 300 IEM - Manual (Page 8)

7
Putting the diversity receiver into operation
Putting the diversity receiver into
operation
Inserting the batteries/accupack
For powering the diversity receiver, you can either use two 1.5 V AA size
batteries or the rechargeable Sennheiser BA 2015 accupack (see “Accesso-
ries” on page 24).
̈
Open the battery compartment by pushing the two catches ¸ in the
direction of the arrows and open the cover µ .
̈
Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
̈
Close the battery compartment by pressing on the center of the
cover
µ
.
The battery compartment cover
µ
locks into place with an audible
click.
Charging the accupack
To charge the BA 2015 accupack:
̈
Insert the diversity receiver into the L 2015 charger (see “Accessories”
on page 24).
Connecting the earphones
̈
Connect the earphones to the socket · .
The L 2015 charger can only charge the combination BA 2015
accupack/diversity receiver. Standard batteries (primary cells) or
individual rechargeable battery cells cannot be charged.
The ground connection of the earphones cable serves as the
antenna for the second diversity section. For details on the
connector assignment, refer to the diagram on page 25.