Setting up connections – Sunrise Medical User Manual User Manual

Page 14

Advertising
background image

14

Setting up connections.

You can connect your PC/laptop to the sunrise surf & talk box using WLAN (wireless) or with a network cable. In
this section you will fi nd the following directions:

Microsoft Windows XP: Setting up WLAN connection on page 14

Microsoft Windows 2000: Setting up WLAN connection on page 18

Microsoft Windows XP: Setting up LAN connection on page 21

Microsoft Windows 2000: Setting up LAN connection on page 23

If you use an operating system other than Microsoft Windows XP (Service Pack 2) or Microsoft Windows 2000,
please read the user documentation from the respective manufacturer.

Setting up a WLAN connection.

In order to connect the sunrise surf & talk box using WLAN, the PC/laptop to be connected must support the
WLAN standard IEEE 802.11b or IEEE 802.11g. If your PC/laptop does not support any of these standards, you
can use an external WLAN adapter (e.g. on USB basis) or an internal WLAN board.

Microsoft Windows XP: Setting up a WLAN connection.

In order to be able to use a WLAN connection between your PC/laptop and the sunrise surf & talk box, the follo-
wing steps are necessary:

1. Confi gure a WLAN connection

2. Establish a WLAN connection

3. Deactivate any proxy server

4. Confi gure encryption for the sunrise surf & talk box

5. Confi gure encryption for your PC/laptop

Note: The following describes how to set up a WLAN connection, as an example, for the WLAN adapter «Intel®
PRO/Wireless 2200BG Network Connection». If you use a different WLAN adapter or a WLAN card, please
read the user documentation of the respective manufacturer.

sunrise surf & talk

Setting up connections

Advertising