Sunrise Medical User Manual - Manual (Page 39)

39
Interconnecting
1. Press the R key and wait for the dial tone.
2. Press the 3 key.
All parties are now connected.
Terminating
You can terminate the conference by replacing the handset.
Caller identifi cation.
Incoming calls
You can see the caller‘s number on the sunrise surf & talk box display. This feature works only if display of the call-
er’s number has not been blocked by the caller.
Outgoing calls
Your own number will also appear on the display of the party you are calling. If the party you are calling does not im-
mediately accept your call, that party can call you back later simply by pressing a button, as your number will remain
stored in that party‘s call list. You can also block display of your own number, for an individual call or for all calls.
Changing the settings for caller identifi cation
1. Lift the telephone handset and wait for the dial tone.
2. Enter one of the following key sequences.
Caller identifi cation Key sequence
Deactivate 3 1 3 1
Activate 3 3
3. Replace the handset.
Blocking caller identifi cation for a single call
1. Lift the telephone handset and wait for the dial tone.
2. Enter the key sequence 3 1 # .
3. Enter the number you are calling.
Your number will not be displayed to the party you are calling.
4. Make your call in the usual manner.
5. Replace the handset.
The call display block will be deactivated automatically when you hang up.
sunrise surf & talk Phoning