Sony XL-DH229N - Manual (Page 4)

09/9/8 XL-DH229N EN
E-3
The first time the unit is plugged in, the unit will enter the
demonstration mode. You will see words scroll.
To dim the display brightness, hold down the CLEAR/
DIMMER button on the remote control for 2 seconds or
more.
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the last
set level.
Turn the volume knob toward VOL +/– (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.
When the power is first turned on, the unit will enter the
extra bass mode which emphasizes the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
1 Press the BASS/TREBLE button to select “BASS”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass.
1 Press the BASS/TREBLE button to select “TREBLE”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble.
When the EQUALIZER MODE button is pressed, the
current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button
repeatedly until the desired sound mode appears.
When you press any of these buttons during stand-by
mode, the unit turns on.
● / button on the main unit : The unit turns on and
playback of the last function will start (iPod, CD,
TUNER, USB, AUDIO IN).
● iPod button on the remote control : The unit turns on
and iPod function is activated.
● CD button on the remote control : The unit turns on and
CD function is activated.
● TUNER button on the remote control : The unit turns on
and TUNER function is activated.
● USB button on the remote control : The unit turns on
and USB function is activated.
● AUDIO IN button on the remote control : The unit turns
on and AUDIO IN function is activated.
In the stop mode of disc or USB operation, the main unit
enters the stand-by mode after 15 minutes of inactivity.
Supported iPod models:
● iPod nano (software 1.2 above)
● iPod mini (software 1.2 above)
● iPod (5 th generation) (software 1.3 above) (Dock
connector equipped Click Wheel model)
● iPod (4 th generation) (software 3.0.2 above) (Dock
connector equipped Click Wheel model)
● iPod nano (2 nd generation) (software 1.0.0 above)
● iPod nano (3 rd generation) (software 1.0.3 above)
● iPod nano (4 th generation) (software 1.0.3 above)
● iPod classic (software 1.0.3 above)
● iPod touch (software 1.1 above)
● iPod touch (2 nd generation) (software 2.1 above)
Caution:
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
Notes:
● iPhone is not supported by this system.
● You can use an audio cable to connect your iPod to the
AUDIO IN jack if:
1. your iPod adaptor does not fit into the iPod dock on
the main unit.
2. you have an iPod that does not have an iPod
adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
General control
1 Press the DEMO button to cancel the demonstration
mode.
2 Press the ON/STAND-BY button to turn the power on.
Function Main unit Remote
control
Operation
Power on /
off Press to turn the
power on or to
go to stand-by
mode.
Demo on /
off ____ Press to enter to
demonstration
on or off mode.
To turn the power on
POWER POWER
ON/STAND-BY ON/STAND-BY
Display brightness control
Volume auto fade-in
Volume control
X-Bass control
Bass control
Treble control
Equalizer
POPS
VOCAL
JAZZ
FLAT
GAME
CLASSIC
For rock music.
For pop music.
No equalization.
For classical music.
For jazz.
Vocals are enhanced.
No equalization.
For game.
For classical music.
For pop music.
Vocals are enhanced.
For jazz.
Auto power on function
Auto power off function
Listening to the iPod
iPod adaptor connection