Sony MZ-NH900 - Manual (Page 98)

98
NO DIGITAL
COPY • You tried to make a copy from a disc that is protected by the Serial Copy
Management System. You cannot make copies from a digitally connected
source which was itself recorded using digital connection.
, Use analog connection instead (page 37).
NO DISC • You tried to play or record with no disc in the recorder.
, Insert an MD.
NO DISC
MEMORY • You tried to erase a setting in the Disc Memory on a disc that contains no
settings in the Disc Memory (page 76).
NO GROUP • You selected “ : Erase” with a disc without group setting.
, You cannot erase groups with a disc with no groups.
• You tried to release a group setting with a disc that has no groups.
, Insert a disc with group settings.
NO INPUT
SIGNAL • The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 21).
NO NAME • You tried to select “Artist” in the Main play mode with a disc that has no
artist name information.
• You tried to select “by Artist” in the Search function with a disc that has no
artist name information.
NON
GROUPED
TRACK • You selected “ : Move” or “ : Erase”, or you tried to label a group
while the recorder is stopped or while playing a track that does not belong to
a group.
, Select a track within a group you want to edit, and then do the editing
operation again.
NO OPERATE • You tried to operate Group Skip function while programming a track using
the remote control.
NotENOUGH
POWER TO
EDIT • You tried to edit the contents of a 1GB Hi-MD disc with insufficient battery
power for editing (page 92).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
NotENOUGH
POWER TO
REC • You tried to record on a 1GB Hi-MD disc with insufficient battery power for
recording (page 89).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
NO TITLE • You tried to select “Album” in the Main play mode with a disc that has no
album name information.
• You tried to select “by Album” in the Search function with a disc that has no
album name information.
NO TRACK • You tried to play a disc with no recorded tracks.
, Insert a recorded disc.
NO TRACK IS
SELECTED • You selected “ : Move” or “ : Erase”, or you tried to label a track
without first selecting a track.
, Do the editing operation again after selecting the desired track first.
P/B ONLY
DISC • You tried to record or edit on a premastered disc (P/B stands for
“playback”).
, Insert a recordable disc.
Message Meaning/Remedy