Samsung VP-D451 - Manual (Page 79)

IEEE1394 Data Transfer
■ CPU: faster Intel ® Pentium III™ 450MHz compatible.
■ Operating system: Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory: more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D453i/D454i/D455i only)
3. Connect the DV cable (not supplied)
from the DV jack of the Camcorder
to the DV jack of the other DV device.
■ Make sure that is displayed.
4. Press the Start/Stop button to begin
REC PAUSE mode.
■ PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the
picture.
6. Press the Start/Stop button to start recording.
If you want to pause recording momentarily, press the Start/Stop
button again.
7. To stop recording, press the (STOP) button.
[ Notes ]
■ When using this Camcorder as a recorder, the pictures that appear
on an external monitor may seem distorted, however recorded
pictures will not be affected.
■ Operation is not guaranteed for all the recommended computer
environments mentioned above.
■ While transmitting data from the Camcorder to PC at strong
electric field and strong magnetic field, VIDEO signal or AUDIO
signal may transmit with noise.
Recording with a DV Connection Cable
(VP-D451i/D453i/D454i/D455i only)
System Requirements
ENGLISH
79 79
IEEE1394
■ CPU Intel ® Pentium III™ 450MHz
■ Windows ® 98SE ME XP Mac OS 9.1 10.2
■ 64MB RAM
■ IEEE1394 IEEE1394
1. PLAYER
2. TAPE
( VP-D453i/D454i/D455i)
3. DV
DV DV DV
■
4. Start/Stop /
REC PAUSE
■ PAUSE
5. DV
6. Start/Stop /
■ Start/Stop
7. STOP
■
■
■ PC
DV ( VP-D451i/D453i/D454i/D455i)
DV
USB
AV/ S