Sanyo DVD-DX517 - Manual (Page 20)

Basic Playback
PICTURE CD PLAYBACK
Place a in the disc tray, then the unit will load the disc automatically(the
maximum size of the picture should be less than 8900*8900 pixels).
Press [ ] to enter the thumbnail mode to preview the pictures.
In the thumbnail mode, use the direction keys to select a picture, then press [ENTER] to
start the playback from the selected picture.
In the thumbnail mode, use the direction keys and [ENTER] to make selection of Slide
Show, Menu, Prev or Next at the bottom of the screen.
Slide Show: Start slide show playback.
Menu: Enter the instruction menu for remote key function. In the menu, press [ENTER] to
turn over to the next menu page and again to exit the instruction menu.
Prev/Next: Turn over to the previous/next page.
Remote key function introduction:
[PROG]: Switch the transition effects(wipe top,wipe bottom,wipe left,wipe right,etc.)
[ ]: Enter the thumbnail mode to preview the pictures.
[ZOOM]: During playback, press [ZOOM], then press [ ]/[ ] to zoom in/out the picture.
When the picture is zoomed in, the direction keys can be used to move the picture. Press
[ZOOM] again to exit the zooming mode.
[ ]/[ ]: Press to skip to the previous/next picture during playback.
[ ]: Press to pause a playback. Press again or press [ ] to resume the playback.
[ ]: Press to start a playback or resume to the normal playback.
[
]/[ ]: Press to rotate the picture counterclockwise/ clockwise during the playback.
[ ]/[ ]: Press to create a vertical/horizontal mirror image.
picture CD
-19-
MP3/CD OPERATION
IMPORTANT INFORMATIONS
- Copyright protection files cannot be
played back.
- Copyright protection files on a disc are
skipped automatically when played back.