Т³гж 9, Remote control function – Sanyo DVD-DX517 User Manual
Page 9
-8-
GOTO
Press to enter an item in the menu or to confirm and execute a selection.
The direction keys can be used to move the highlight in the menu.
Press to open /close the disc tray.
OPEN/CLOSE
SETUP
Press to enter/exit the setup menu.
The digit keys can be used to input numbers or make selection of a track or a
chapter, etc.
During playback, press to enter the GOTO menu. In the menu, use the
direction key [UP]/[DOWN] to select a setting item and press [ENTER] to enter
the editing state, then with the digit keys input a specific track, disc time, track
time, chapter, title, chapter time or title time to go to directly. Press it again to
exit the GOTO menu.
Press this button to enter/exit the program menu with which you can playback
the contents of a disc in your desired order.
In the program menu, use the direction keys and digit keys to make a program
list, then move the highlight on START and press [ENTER] to start program
playback.
During program playback, press [PROG] to enter the program menu. Now,
STOP is highlighted. Press [ENTER] to cancel the current program playback.
PROG
N/P
Press repeatedly to select a TV type, NTSC, PAL or MULTI.
И ·
И П
ENTER
ENTER
STANDBY/ON
Press to switch on the unit. Press it again to put the unit in standby mode.
Press for fast forward playback. The available speeds are 2X, 4X, 8X, 16X and
32X.
Remote control Function
Press to temporarily pause a playback. Press it again to resume the playback.
Press to start a playback or resume the normal playback from the fast forward,
fast reverse, frame-by-frame, slow-motion playback, etc.
Press to return to the previous chapter/track.
Press to skip to the next chapter/track.
Fast reverse playback. The available speeds are 2X, 4X, 8X, 16X and 32X.
STEP
Press it once to pre-stop a playback. Press [ ] to resume the playback from
the pre-stopped status. Press it twice to stop a playback and the disc will be
reset to the starting point.
Press repeatedly to advance the video frame by frame. Press [ ] to resume the
normal playback. (Note: Applies to DVD,
.)
VCD discs, etc