Sirius Satellite Radio SIRIUS InV2 - Manual (Page 76)

[
Troubleshooting
] 76
Troubleshooting
Symptom Solution
The InV2 does not
power ON Blown fuse, or the power cable is not properly connected.
• Check for a bad fuse and check power cable connection
Display reads:
No Antenna The satellite antenna is not connected to the radio.
• Check the satellite antenna connection to the radio.
Display reads:
No Signal No satellite signal is being received.
• Check for obstacles over or around the satellite antenna.
• Change the vehicle location to eliminate nearby obstacles
(bridges, overpasses, tress, buildings, etc.).
Audio static or loss of
clarity The FM frequency contains static.
• Locate a quiet FM frequency on your vehicle radio and set
the InV2’s FM transmitter frequency to match.
• If using the InV2’s AUDIO OUT connector, check the
cable connections.
No sound The audio cables are not connected, or the vehicle’s FM
radio is set to the wrong frequency.
• Check the audio cables at the InV2 and the vehicle’s audio
system.
• Tune the vehicle’s FM radio to the same FM frequency the
InV2’s FM transmitter is tuned.