Swisher Truck Spreader 11730 - Manual (Page 6)

Step 6:
Attach the Mounting Weldment (23) to the Spreader Assembly by
putting the U-Bolts (26) over the Mounting Tubes (21 & 22) and into
the holes on the Mounting Weldment (23). Mount the Support
Weldment (27) onto the rear of the Mount Weldment (23) and place
the Washers (27) onto the Bolts (26) as shown and thread the Nuts (10)
in place. Making sure that the support tubes are resting on the lip
provided, tighten the nuts, securing the Mounting Weldment (23) and
Support Weldment (27) to the Spreader Assembly.
Item # Part # Description
10 NB181 Nut - Nyloc 5/16-18 ZY
23 10981TK Mount - Weldment; Truck Spreader
25 NB579 Washer - Fender, 5/16 X 1 1/4 OD ZY GR2
26 9855 Bolt - U, Sq 3/8-16 x 1 5/8" x 2 1/2"
27 11728TK Support - Weldment; Truck Spreader
10176 Lid - Tank
10531 Adapter - Kit, 12 Volt