Power supply specifications – Star Micronics SP2000 Series User Manual
Page 134
– 131 –
APPENDIX
Ambient temperature/humidity
Operating temperature:
0
°
C to +50
°
C
Operating humidity:
10% to 80% RH (at 40
°
C, without condensa-
tion)
Storage temperature:
–20
°
C to +70
°
C
Storage humidity:
5% to 95%RH (at 40
°
C, without condensa-
tion)
Mechanism reliability:
5,000,000 lines MCBF (except head life and
auto cutter)
Print head life:
70 million characters
Power Supply Specifications
Power Supply:
Optional AC Adaptor:
PS48-24A, switching type
Input:
90 to 264V AC, 50/60Hz
Output:
24V DC
±
5%, 2.0A
Plug:
3-pin POWER JACK TCP 8927 (Hoshiden
brand or equivalent.)
Consumption Current:
Conditions: 24V, excluding perpheral unit
driving
Operating:
Continuous ASCII printing: 0.7A
(approximate averages)
Solid block printing: 1.5A
Peak (solid printing): 3.1A
Stand-by:
0.24 A
(approximate averages)
Important!
When using a printer power supply other than the optional AC adaptor (PS48-
24A), be sure that the following cautions are observed.
•
Use a power supply of DC 24 V
±
5% and more than 2.0 A.
•
Be careful about installing the printer in an area where there is noise. Take the
appropriate measures to protect against electrostatic AC line noise, etc.