Recording from connected equipment, T) (43) – Sony RDR-GX380 User Manual

Page 43

Advertising
background image

43

Rec

o

rd

in

g

The recorder automatically divides a recording (a
title) into chapters by inserting chapter marks at 5
or 10-minute intervals during recording. Select the
interval, [5 minutes] or [10 minutes] for [Auto
Chapter] in the [Video] setup (page 72).

z

Hints

• You can create chapters manually when playing a

DVD+RW, DVD-RW (VR mode), or DVD+R
(page 59).

• When recording in ULP mode, chapter marks are

inserted at 10-minute intervals.

You can use the Title List to make a new recording
over a title previously recorded on the disc. For
details about the Title List, see page 30.

1

Insert a DVD+RW.

2

Press PROG +/– or INPUT to select a
programme position or input source.

3

Press TITLE LIST to turn on the Title List.

4

Press </M/m/, to select the title you
want to overwrite.

5

Press z REC.

Recording starts.

To stop recording

Press x REC STOP. Note that it may take a few
seconds for recording to stop.

z

Hint

If you erase a title from a DVD+RW, it appears as [Erase]
in the Title List. This will not increase the remaining time
on the disc. However, the remaining time will be
increased when erasing the last title. You can select
[Erase] from the Title List and make a new recording on
top of it (page 56).

b

Notes

• A protected title cannot be overwritten (page 57).
• If the selected title is shorter than the new recording, or

less than ten seconds, the recorder automatically
overwrites the next title in the Title List. If you do not
want a title to be overwritten, protect the title (page 57).

Recording From Connected
Equipment

You can record from a connected VCR or similar
device. To connect a VCR or similar device, see
“Connecting a VCR or Similar Device (page 22).
Use the DV IN jack on the front panel if the
equipment has a DV output jack (i.LINK jack).

1

Insert a recordable disc.

2

Press INPUT to select an input source
according to the connection you made.

The front panel display changes as follows:

3

Press REC MODE repeatedly to select the
recording mode.

The recording mode changes as follows:

4

Insert the source tape into the connected
equipment and set to playback pause.

Creating chapters in a title

Overwriting a recorded title

+

RW

-RW

VR

-RW

Video

+

RW

-

R

+

R

1

2

3

4

5

6

7

8

9

0

x REC STOP

REC MODE

INPUT

z REC

Programme
position

L1

L2

L3

dV

HQ

SP

LP

EP

ULP

,continued

Advertising