Sprint Nextel SANYO PRO-700 - Manual (Page 160)

146 Section 2I: Using Your Phone’s Voice Services
Using Voice-Activated Dialing
You can use a voice dial tag to automatically dial a phone
number in your Contacts. (A voice dial tag is a command you
record and use to place calls without using the keypad.) Your
phone can store up to 30 voice dial tags.
Making a Call Using Voice-Activated Dialing
1. Press and hold .
2. Follow the voice prompts and recite the entry’s voice dial
tag into the microphone.
Programming Voice Dial Tags
1. Select a Contacts entry to which you would like to add a
voice dial tag and press . (See “Finding Contacts
Entries”on page 119.)
2. Select the number you want to assign to the voice dial
tag, and then press Options (right softkey) >
SetVoice Tag > Add.
3. After you are prompted to say a name to program, wait
for the beep and then say the name into the microphone.
4. Repeat the name after the beep, as prompted.
(The display shows “Voice Tag Recorded.”)
Tip Record voice dial tags in a quiet environment.
Tip You can also make a call using voice-activated dialing with the
phone closed. Press and hold the side call key while in standby
mode, and follow the voice prompts.
Note Please set the Voice Guide feature (see page 67) to On before
using the Voice-Activated Dialing so that you can hear voice
instructions through the phone. The default setting is
Off .