Sprint Nextel SANYO PRO-700 - Manual (Page 72)

58 Section 2B: Making and Answering Calls
Making Group Connect Calls
Group Connect call allows you to communicate with up to 20
other members of a user-created group. For information on
creating groups and saving in your Contacts, see “Creating a
Group Connect Entry”on page 118.
1. Press Contacts (right softkey).
– or –
Press
>History.
2. Select a group connect entry and press .
3. Continue the Group Connect call as if making a regular
Direct Connect call.
4. When you are finished, press to end the call.
Troubleshooting Tip If you get an error message saying that your
contact “is not reachable via Direct Connect”or
“this number is not DC capable,”please check to
see that you have highlighted a valid Direct
Connect number.
Currently Sprint phones do not support Group
Connect calls with Nextel and PowerSource
phones. This enhancement is planned for
future implementation. If your calls are not
going through, please check to see if your
contact is using a Sprint phone.
Note When making a Group connect list, make sure you select the
DC number for each contact you add. Go to the contact name
and use the arrow keys to scroll through that contact’s
numbers until the Direct Connect number is highlighted.
(See “To tell if a number is a valid Direct Connect number”on
page 51.)