Shure Conference Phone - Manual (Page 13)

4
12
4.3 Test Mode
Activate test mode by pressing and holding both of the
and buttons for approximately three seconds.
The installed software version appears in the display and
the lighted rings on all delegate consoles illuminate in
order to permit simple detection of any cable breakage or
defective consoles.
Press the SELECT button to return to normal operating
mode.
4.4 Language Selection
Access the Language selection menu by pressing and
holding both the
and buttons for approximately five
seconds. The current language appears in the display.
Use the
and buttons to select a different menu lang-
uage, then press the SELECT button to activate it and
return to the status page.
ConferenceOne
SHURE Ver .1.0i
Select Language
English
English