Sony T68i - Manual (Page 23)

This is the Internet version of the user's guide. © Print only for private use.
Calling 23
Profiles
Your phone has a number of pre-set profiles which are
set to suit a certain environment. You can add accessories
to, rename or change these profiles. For example, when
you go to a meeting, you can simply choose the Meeting
profile and a number of settings, such as the ring signal,
are turned off.
• To select a profile, scroll to Settings/Profiles/Select
profile.
To change a profile setting
1. Scroll to Settings, YES , Profiles, YES , Edit profile, YES .
2. Select a setting, YES .
3. Change the profile settings and press YES to confirm.
• To rename a profile, scroll to Settings/Profiles/Edit
profile/Profile name:.
You can reset all profile settings to the way they were
set when you bought your phone.
• To reset all profiles, scroll to Settings/Profiles/Reset
profiles.
Automatic activation
Some profiles, for example In car, are automatically
activated when used with a specific accessory. When
disconnected, the profile is changed back.
Calling
Before you can make or receive any calls, you must
turn on the phone and be within range of a network.
See “Making and receiving calls” on page 5.
Making calls
1. Enter the area code and the phone number.
2. Press
YES to make the call.
3. Press NO to end the call.
Tip: You can call numbers from the call list and
the phonebook. See “Call list” on page 25 and
“Phonebook” on page 25. You can also use your
voice to make calls. See “Voice control” on page 30.
To change the earpiece volume during a call
• Slide the volume key on the side of the phone up or down
to increase or decrease the earpiece volume during a call.
To turn off the microphone during a call
• Press and hold until the display shows Muted.
Press and hold again to resume the conversation.
Note: The microphone must be turned on to change
the earpiece volume during a call.