Smeg ALFA141XE - Manual (Page 11)

31
Instructions for the User
4.6 Running a program
From the “OFF” status proceed as follows:
• Turn the knob to the or symbols to select one of the available
programs from P01 to P38. The display will show the parameters of
the selected program in rotation.
• To start the program press the “START” button. The appliance will
perform a preheating cycle, showing the message “PrEh” on the
display.
• When preheating is finished, a series of beeps lasting 3 seconds
indicate that is possible to proceed with the cooking operation. The
message “PrEh” will flash on the display.
• To start the cooking, keep the “START” pressed for 2 seconds. The
display will show, in order, the temperature set, the time remaining
until the end of cooking and the program selected.
• It is possible to start the cooking early before the preheating
temperature is reached, by keeping the “START” button pressed for 3
seconds.
• During the last minute of cooking, only the countdown of the
remaining 60 seconds will be displayed. At the end, a beep and the
text “End” flashing (for 20 minutes) will indicate that the cooking has
been completed.
• To return to the “OFF” condition keep the “STOP” button pressed for 4
seconds.
During cooking, if it is necessary to open the oven door, the display
shows the message “
door” together with a continuous acoustic signal.
When the door is closed the oven will continue cooking.