Smeg ALFA141XE - Manual (Page 10)

30
Instructions for the User
4.5 Editing / saving a program
The oven has 38 programs that can be modified by the user (from P01 to
P38). To set the operational parameters of a program:
• Turn the knob to the or symbols to select the program you wish
to save / edit.
• Keep the “PUSH” knob pressed for 3 seconds: the display will show
the cooking temperature.
• Turn the knob to the or symbols to set the cooking temperature.
• Press the “PUSH” knob: the display will show the cooking time.
• Turn the knob to the or symbols to set the cooking time (from 1
to 99 min).
• Only on the steam model, press the “PUSH” knob; the display will
show the “H00” humidification cycle. Turn the knob to the or
symbols to set the humidification from “H00” to “H10”.
• Press the “PUSH” knob to exit from the data setting and saving phase.
The message “PEnd” will appear on the display and the parameters
will be saved.
• After 3 seconds the display will show the parameters set in rotation.
• To return to the “OFF” condition keep the “STOP” button pressed for 4
seconds.