Sony SVR-S500 - Manual (Page 42)

D:\DVR project\Instruction
manual\DTP\2689634111\GB12ADJ-CEK.fm
master page=left
SVR-S500
2-689-634-11(1)
42
Video and Audio Settings
(Options)
The “Options” setup allows you to adjust the items
related to the image size, colour and sound, such
as language and audio output level.
Choose the settings according to the type of TV,
VCR or similar device connected to the Hard Disk
Recorder.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Options,” and press ENTER.
The “Options” setup appears with the
following options. The default settings are
underlined.
TV Type
Select the playback picture size according to the
type of connected TV (wide-screen/wide mode
TV or conventional 4:3 screen TV).
TV Scart
Selects a method of outputting video signals for
the LINE 1 – TV scart.
b Note
If your TV does not accept S-video or RGB signals, black
and white picture or no picture appears on the TV screen
even if you select “S Video” or “RGB.” See the
instructions supplied with your TV.
VCR Scart
Selects a method of inputting / outputting video
signals for the LINE 2 - VCR / STB scart.
b Notes
• If your TV or VCR does not accept S-video, black and
white picture or no picture appears on the TV screen or
black and white picture or no picture will be recorded
on your VCR if you select “S Video”. See the
instructions supplied with your TV or VCR.
• The mute and volume control function do not operate
on LINE 2 - VCR / STB output.
• To be able to view the signals from the connected VCR
on the TV via the Hard disk recorder’s LINE 2 - VCR
/ STB (line through feature), you may press the INPUT
SELECT button on your remote to switch the
recorder’s input to enable the VCR video signal to pass
through the Hard Disk recorder.
• This recorder cannot record the contents from the
connected VCR, STB or similar device.
4:3 Letter
Box Select this when connecting to a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
4:3 Pan
Scan Select this when connecting to a
4:3 screen TV. Automatically
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
Wide
Screen Select this when connecting to a
wide-screen TV or TV with a wide
mode function.
SETUP
Options
TV Type
TV Scart
VCR Scart
Audio Language
Audio Level
Setting
4:3 Letter Box
Composite
Composite
English
100
12:15
RGB Outputs RGB signals.
Composite Outputs composite video signals
(CVBS).
S Video Outputs S-video signals.
Composite Outputs composite video signals
(CVBS).
S Video Outputs S-video signals.
16:9
4:3 Letter Box
4:3 Pan Scan