Connecting a vcr or similar device – Sony SVR-S500 User Manual

Page 9

Advertising
background image

D:\DVR project\Instruction

manual\DTP\2689634111\GB04BAS-CEK.fm

master page=right

SVR-S500

2-689-634-11(1)

9

H

ook

up
s and

Se
tti

n

gs

After disconnecting the mains lead from the mains, connect a VCR or similar recording device to the
LINE 2 - VCR / STB jack of this recorder.

b

Notes

• Be sure to connect your VCR to the Hard disk recorder and your TV in the order shown below. To watch video tapes,

watch the tapes through a second line input on your TV.

If your TV is not featured with a second line input, you can pass the VCR signal via the Hard Disk recorder to watch
video tapes on the TV. If necessary, press the INPUT SELECT button on your remote to switch the recorder’s input
to the LINE 2 - VCR / STB line to enable the VCR video signal to pass through the Hard Disk recorder.

• This recorder cannot record the contents from the connected VCR, STB or similar device.
• If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR on the

TV.

Connecting a VCR or Similar Device

TV

Hard disk recorder

to LINE 1 - TV

VCR

to LINE 2 - VCR / STB

SCART cord (not supplied)

to SCART input

VCR

Hard disk recorder

TV

Line input 1

Line input 2

Advertising